Double Glazed Window Repair
Double glazing is an excellent investment in energy efficiency. It helps prevent loss of heat in the winter months and keeps your home cool during summer. Repairing your double-glazed windows whenever required is a great method to keep them in good condition.
Over time, your double-glazed windows may suffer from issues like condensation and misting. This could cause your double glazed windows to be difficult to open or shut.
Broken Panes
A unruly ball or a stone flying from your lawnmowers or an intense storm could shatter your double-pane windows which can expose your home to the elements. Although a cracked glass window isn't easy to fix however, it does not need to be replaced. The insulated glass between two glass panes is still in good shape So you can repair your double-paned window on your own.
To start, you'll need to take the broken glass out of the frame. This will be a messy job and you'll need to be cautious to prevent any glass fragments from falling onto the floor or falling out of the frame. Use a pair of gloves to protect your hands and a rag to cover the area surrounding the broken glass to prevent further breakage or cuts. After you have removed the broken glass clean the frame of the window thoroughly, removing any sealant or debris. It's important to smooth rough areas of the frame to ensure an even surface for your new glass.
Once the frame is cleaned, you can apply a fresh layer of glazing to the seam in which the broken pane was removed. This is the best method to ensure your window stays sealed and protected and help you save energy costs by stopping drafts and water from entering the house. Next, you will need to choose the right glazing material. There are a variety of options such as clear tape, which is more durable than regular tape and prevents further cracking of your window or glazing film that is similar to clear plastic wrap. The benefit of this type of material is that it can be painted to match your existing frame and will also keep out rain and snow as well.
Whatever the material you choose, it is important to press the glazier's points into the seam where the putty meets the frame. They will help hold the new glass in place and assist it stick to the frame. Hardware stores sell glazier's point ropes, which you can roll out on the frame rabbets.
Condensation
Double glazing is susceptible to condensation issues. If you encounter this issue, it is best to call the company that installed the window. Many companies offer warranties and guarantees to cover the problems. Fogging or condensation between the panes of your windows is a sign that the seals aren't working properly. Only a professional can resolve this problem by replacing both panes.
This procedure is a bit tricky and requires the use of specific tools to remove the old pane and install the new one, however it is possible to do this by an expert who will provide the required equipment. Making use of these tools can be dangerous it is recommended to leave this kind of work to professionals.
If you choose to do this yourself, be sure to wear gloves and safety glasses to shield yourself from any broken glass pieces that might fly away during the process. double glazing windows repair is important to take out all metal or putty points from the grooves that will hold the new window. You will also want to brush the frame with wire, and then vacuum or wipe it with a damp cloth. After the frame is dry it is time to order an additional piece of glass that's 1/8" shorter in both directions than your existing window. Make sure the glass fits into the grooves.
Depending on your frames You will then have to apply the caulk on the grooves to ensure that the new pane is secure in the right place. Once the caulk has dried it is time to smooth it out and make any necessary adjustments. The wood molding will then be put back in place.
Double-glazed windows can become difficult to open or close if the weather changes dramatically. Extreme temperatures can cause the frames of double-glazed windows to expand or contract, causing them to become sagging and stick. If this is the problem, you can try wiping the frames using water and lubricating joints. However, it might be best to ask the company who installed your windows to help.
Misunderstood
Misted Double Glazing is a problem with windows that develops when moisture gets trapped between the glass panes of double glazed windows. Double glazing is comprised of two panes of glass that are separated by an insulating space typically filled with argon gas to provide increased thermal efficiency. This results in an airtight seal that keeps warm air inside, and cold outside air out.
In time, however, this seal may break and moisture will begin to accumulate between the window panes, causing them to turn misty. This happens because the space between the panes gets heated by the sun, which causes water vapour to develop within it.
It is a natural phenomenon, but if it occurs between the panes of the window it can be a problem because it won't be able to control the temperature in the room. Instead the temperature outside the window will influence the temperature inside. Northfield Glass can help you if your double-glazed windows start to fog.
We can replace the blown sealed unit without needing to replace the entire window, which is a lot less disruptive than a total replacement. Our misty window repair involves removing the glass unit, washing it, and replacing it with a fresh one to create a watertight seal again.
Some companies in the field claim that they can inject chemicals through holes into misted windows to remove the fog and condensation. We do not recommend this method. This is not only unattractive, but it could cause damage to the toughened glass and leave you with windows that do not completely perform its function.
If you don't fix the issue quickly, it could lead to mould, which could not only damage the window, but also cause health risks for your loved ones. The moisture in the window may cause other issues in your home such as damp or rot. In certain situations it might be necessary to replace the entire window.
Blown or Failed
Modern double-glazed windows come with two glass panes that have an inert gas or air between them. This helps to improve their thermal efficiency, allowing the cold out and heat in. As time passes, the gas may depressurize and cause a variety of issues.
Condensation between the panes is one of the most common. It is not a sign of a failure in the window however it could be a sign you need to reseal the windows. Condensation may be a sign your double glazing has failed, in which case it's time to get it replaced completely.
Double-glazed windows may also cause draughts. This could be because of the seal being damaged, a broken handle, or a broken lock. A draught is evident and can result in higher heating bills, so it is important that you get this fixed sooner rather than later. You can test the seals by rubbing around the edges of the window frame to see if you feel any cold air.
Another indication that your window seals have failed is when you begin to see water dripping on the inside of your windows. This is a sign that you need to reseal the double glazed windows.
Your window frames are designed to move slightly and this is essential to keep the glass sheets in their place. However, with time, this special packaging material can get compacted, and this could cause the seal to break. This allows air to flow between the panes, and decrease the efficiency of your window.
A damaged seal is a clear sign that your double glazing is damaged and must be fixed as soon as possible. A damaged seal can stop your double glazing from fulfilling its primary function of keeping the cold out and warm inside. In addition, a blown seal will let your home's moisture in, which can cause mold and other uncomfortable conditions. It is recommended to contact a double glazing repair expert when you spot a damaged seal in your double-glazed windows, since they could replace the entire unit.